CCTV preventive maintenance checklist and visit schedule for installers

CamVerion team · 19 November 2026 · 7 min read

Quick answer

A CCTV preventive maintenance visit checks every camera's view and recording, the recorder and drives, backup power, network and remote access, and the customer's concerns, then ends with a written report. Most commercial sites need two to four visits a year, scheduled in advance so none are missed.

Most CCTV failures don't happen suddenly. A drive collects bad sectors for months. A power supply runs hot for a year. A spider builds a web in front of an infrared lens. A camera slowly drifts out of position after a storm. Preventive maintenance catches these problems before the customer discovers them on the day they need footage.

This checklist sets out what to check on a routine maintenance visit. Adapt it to the size of the system and the terms of your maintenance contract. For how to price and sell maintenance, see our AMC guide.

Before the visit

Preparation makes visits faster and more useful:

  • Review the job history: past faults, replaced parts and notes from the last visit.
  • Check remote health, if you have access: offline cameras, drive warnings and recording gaps.
  • Ask the customer whether anything has changed or is bothering them.
  • Bring spares for common failures: power supplies, connectors, a spare camera and a known-good drive.
  • Bring cleaning materials: soft cloths, lens cleaner, a brush and a blower.

Cameras

Check every camera, not just the ones the customer mentions.

Check What to look for
Live image Clear, focused, correctly framed
Night image Infrared working, no glare or reflections
Dome or window Dust, water marks, spider webs, scratches
Housing and mount Secure, not loose, no corrosion
Cable entry Sealed, no water ingress
Field of view Not blocked by new signs, trees, stock or shelving
Time and name overlay Correct camera name and time

Clean domes and lenses carefully. Dirt that is barely visible in daylight can cause heavy glare at night when infrared reflects off it. Our night vision guide explains why.

Compare each view with the photo or screenshot taken at commissioning. Gradual drift and new obstructions are easy to miss without a reference.

Recorder

  • Recording status: every camera is recording according to its schedule.
  • Retention: check the oldest available recording, and compare it with the agreed number of days.
  • Playback: play back footage from each camera at a few random times.
  • Search and export: export a short clip to confirm it works and plays.
  • Time synchronisation: the recorder's time is correct, and synchronising automatically.
  • Event logs: look for repeated video loss, reboots or errors.
  • Firmware: check for updates, and apply them where appropriate after checking the release notes.
  • Ventilation: fans working, vents clear, no excess dust.

Hard drives

  • Health status: check S.M.A.R.T. or the recorder's drive health report.
  • Errors and warnings: note any bad sectors or reallocated sectors.
  • Temperature: check drive temperature readings, where available.
  • RAID status: confirm the array is healthy, if RAID is used.
  • Age: record the installation date and plan replacement on critical systems.

Our hard drive selection guide covers replacement planning.

Power

  • UPS: run a self-test if the UPS supports it, and check battery status.
  • Battery age: note when batteries were last replaced.
  • Power supplies: check for heat, swelling or noise.
  • PoE switch: check total power use against the budget, and look for ports cycling.
  • Connections: tighten loose terminals, and check for corrosion outdoors.

Our power backup guide covers UPS sizing and battery care.

Network

  • Camera connectivity: no cameras dropping off the network.
  • Switch ports: errors or unusual link speeds can point to cable faults.
  • IP addresses: no conflicts or changed addresses.
  • Bandwidth: no overloaded links on larger systems.

Our networking basics guide covers what to look for.

Remote access and security

  • Mobile app: test live view and playback on the customer's phone.
  • Accounts: remove users who no longer need access, such as former staff.
  • Passwords: confirm default passwords are not in use.
  • Remote access method: confirm no unnecessary ports are open on the router.
  • Notifications: test alerts, and adjust if the customer gets too many or too few.

Our cyber security guide covers secure remote access.

Talk to the customer

A maintenance visit is also a conversation. Ask:

  • Have there been any incidents, and could they find the footage they needed?
  • Are there new areas they want covered?
  • Have they had any problems with the app?
  • Have there been any changes to the building, such as new walls, lighting or layout?

These questions often lead to small additions, upgrades or adjustments. They also show the customer that you care about whether the system is useful, not just whether it is switched on.

Record everything

At the end of the visit, record:

  • What was checked.
  • What was found.
  • What was fixed or adjusted.
  • Parts replaced, with serial numbers.
  • Recommendations, with priority.
  • Photos of any problems.

In CamVerion, notes, photos and expenses on each job or service call keep this with the customer's history, so the next technician can see it.

The maintenance report

Leave the customer with a short report. It shows the value of the visit, and gives them a record if they need to prove that the system was maintained, for example for insurance.

A simple report includes:

  1. Date of visit and technician name.
  2. Summary: system healthy, minor issues, or action needed.
  3. A table of cameras with status.
  4. Recorder, drive, power and network status.
  5. Issues found and fixed.
  6. Recommendations, with priority and price where relevant.
  7. Date of the next visit.

Keep recommendations clear and honest. "Drive health warning: replace within three months" is more useful than a long list of minor observations.

How often to visit, and scheduling the visits

The right frequency depends on the system and the risk:

System Typical frequency
Small residential or shop Yearly
Commercial, office or retail chain Every 6 months
Busy, outdoor or harsh environments Every 3 months
Critical sites As the customer's risk assessment requires

Outdoor cameras in dusty, coastal or industrial areas need cleaning more often. Construction sites change constantly. Our guide to CCTV for construction sites covers site-specific needs.

Service scheduling software for planned visits

Preventive visits are easy to sell and easy to forget. The visit due in March slips to May when installation work is busy, and the customer notices.

Service scheduling software takes the remembering out of it. In CamVerion, a maintenance contract records the customer, the term and how often to visit. Each visit becomes a service call for the assigned technician a week before it is due, the calendar shows who is free, and the work, photos and parts are recorded on the visit for the report.

Common mistakes

  • Checking only live view, without testing recording and playback.
  • Not checking night images.
  • Ignoring drive warnings until the drive fails.
  • Forgetting UPS batteries.
  • Leaving old user accounts active.
  • Not recording what was done, so the next visit starts from scratch.

The checklist in short

  1. Review history and remote health before the visit.
  2. Check and clean every camera, day and night.
  3. Confirm recording, retention, playback and export.
  4. Check drive health and RAID status.
  5. Test UPS, power supplies and PoE budget.
  6. Check the network for drops, errors and conflicts.
  7. Test the app, review accounts and confirm security settings.
  8. Ask the customer about incidents and changes.
  9. Record everything, with photos.
  10. Leave a short report with clear recommendations.

Preventive maintenance is unglamorous, but it is what keeps a system reliable. It also gives you regular contact with the customer, which is where upgrades, additions and referrals come from.

Frequently asked questions

How often should CCTV be maintained?

Most commercial systems need two to four preventive visits a year. Harsh environments such as kitchens, dusty sites or coastal areas may need more.

What does a CCTV maintenance visit include?

Cleaning cameras, checking views, focus and night images, recording and retention, recorder and drive health, backup power, network and remote access, and a written report.

How do installers make sure maintenance visits are not missed?

Schedule them from the contract, not from memory. Software that creates each visit as a service call before it is due keeps them on time.

Run your next installation job from one place

Sign up with your company details. We verify them, approve your account once your setup fee is received, then you can add your team.

Request a demo

Leave your email and we will get in touch to set up a short demo.