Solar O&M and service management software: cleaning visits, faults and service calls that never get lost

CamVerion team · 19 November 2026 · 6 min read

Quick answer

Solar O&M software schedules cleaning and preventive maintenance visits, logs breakdowns and generation complaints, records the work and charges, and keeps each plant's service history on one record.

A rooftop solar system is expected to work for 25 years, and customers expect their installer to be there for much of that time. Panels need cleaning, inverters show faults, connectors loosen and generation drops. Operations and maintenance (O&M) work is also a steady source of income and referrals for solar companies that do it well.

O&M and service management software makes that work organised. This guide explains what it should do.

Why solar service is hard to manage

  • Many small sites, spread across a city or region.
  • Regular visits that are easy to forget, such as cleaning.
  • Faults reported in many ways: calls, WhatsApp messages or a photo of the inverter display.
  • Technicians without history, who do not know what was installed or what was done last time.
  • Unbilled work, such as chargeable visits outside warranty.

What solar O&M software should do

Log every service request

Every fault, generation drop or cleaning request should be logged as a service call with the customer, site, contact and a clear description, for example "inverter shows grid fault since Tuesday, generation zero". A photo of the inverter display helps the technician bring the right parts.

Assign an owner and track stages

Each call needs one responsible technician and clear stages, such as Open, Investigating, Issue traced, Being fixed and Resolved. The office can then answer the customer's "when is someone coming?" in seconds.

Book regular visits on the calendar

Cleaning and preventive maintenance visits should be booked against technicians on a shared calendar, so they are planned rather than remembered. Group visits by area to cut travel, and book the next round before this one ends.

Show each site's history

The technician should see what was installed, when, and every earlier visit and fault. An inverter that has faulted three times may need replacing under warranty, not another reset.

Record parts, travel and charges

Spare parts, travel and chargeable time should be recorded against the call. Customers outside warranty or without a maintenance agreement can then be billed correctly, and you learn what service really costs.

Send a record to the customer

When the work is done, a short receipt or summary of what was done and charged reassures the customer and avoids disputes.

Turning O&M into a business

Many installers treat service as a cost. The better ones sell it:

  • Offer a maintenance agreement at handover, with a set number of cleaning and check-up visits a year.
  • Price it so that visits are profitable, including travel.
  • Record every visit so renewals are an easy conversation.
  • Use visits to spot upgrade opportunities, such as adding a battery.

Our guide to maintenance contracts explains how to structure and price service agreements, and the principles carry over to solar.

Measure your service

Each month, review:

  • Open service calls and their age.
  • Average time from report to fix.
  • Visits completed against visits planned.
  • Service revenue and cost.

Monitoring and service work together

Inverter monitoring portals tell you when generation drops. Service software tells you who is fixing it and when. Use both: when monitoring shows a problem, log a service call straight away so it has an owner.

Common solar faults and first checks

Knowing the usual faults helps the office ask the right questions and helps the technician bring the right parts.

What the customer reports Common causes First checks
Generation is zero Grid outage, inverter fault, tripped breaker, isolator off Inverter display and error code, breakers, grid supply
Generation lower than usual Dirty panels, shading from new growth or construction, one string not producing Panel condition, string voltages, recent changes around the roof
Inverter shows a grid fault Voltage or frequency outside limits, loose AC connection Grid voltage at the inverter, AC terminals
Earth fault or insulation alarm Damaged cable, water in a connector or junction box Insulation test, cable routes and connectors
Monitoring app shows offline Wi-Fi changed, router replaced, logger lost power Logger and router, reconnect to the new network
Battery not lasting Ageing battery, settings changed, higher loads than planned Battery health, inverter settings, what is connected to backup

Ask the customer for a photo of the inverter display and a screenshot of the monitoring app when they call. Many visits are faster, and some are not needed at all.

Planning cleaning and maintenance rounds

Regular visits work best when they are planned in rounds, not one at a time:

  1. Group sites by area and size.
  2. Decide the frequency by the local dust, the season and the contract, for example monthly for dusty industrial roofs and quarterly for homes.
  3. Book a full round for each crew, so they move from site to site in one area.
  4. Note any site that needs special access, such as a factory's safety induction or a society's permission.
  5. Record each visit with before and after photos and the generation reading.

Cleaning should be done early in the morning or late in the afternoon, using clean water and soft tools, never on hot panels in the middle of the day.

A preventive maintenance checklist

A yearly or half-yearly check might cover:

  • panel cleaning and a visual inspection for cracks, hot spots and soiling
  • structure bolts, corrosion and roof penetrations
  • DC connectors, junction boxes and cable routing
  • inverter display, error history, ventilation and firmware
  • protection devices, earthing and lightning arrester
  • monitoring connection and data logging
  • generation compared with the same month last year

Write the findings into the visit record and leave the customer a short report. Anything that needs repair becomes a quote, not an argument.

Pricing O&M agreements

Customers renew O&M agreements when the price is clear and the value is visible. When pricing:

  • Work out the real cost of each visit: technician time, travel, water and consumables.
  • Price per kW for larger systems, and per visit or per year for homes.
  • State what is included and what is charged extra, such as replacement parts, inverter repairs outside warranty or extra cleaning visits.
  • Offer a discount for paying the year in advance.

Send a short summary at the end of each year listing the visits done, faults fixed and generation recorded. It is the easiest renewal conversation you will have.

Warranty claims

Panels, inverters and batteries carry manufacturer warranties, but customers expect the installer to handle claims. Keep serial numbers, invoice dates and photos on the customer's record from installation. When a fault looks like a warranty case, record the error codes and readings on the service call, and follow up with the manufacturer until the replacement is fitted. Customers remember installers who handle this without fuss.

Solar O&M software: how CamVerion fits

CamVerion's service calls have clear stages, an assigned or claimed technician, notes, parts and charges as expenses, and a receipt for the customer. O&M contracts can be set up as maintenance contracts, so each cleaning or inspection visit becomes a service call a week before it is due, and contracts due for renewal are listed on the dashboard. It is part of CamVerion's solar EPC software, so service sits on the same record as the original project.

Frequently asked questions

What is solar O&M?

Operation and maintenance of solar plants: cleaning, inspections, preventive maintenance and fixing faults.

How often should solar panels be cleaned?

It depends on dust and rainfall; monthly to quarterly is common in dusty areas. Contracts usually specify the frequency.

Does O&M software monitor generation?

Not usually. Inverter monitoring tools track generation; O&M software runs the visits, faults and billing.

Run your next installation job from one place

Sign up with your company details. We verify them, approve your account once your setup fee is received, then you can add your team.

Request a demo

Leave your email and we will get in touch to set up a short demo.